A running toilet, a weak flush, or a unit that's finally ready to be replaced. We handle the full range, from a five-minute fill valve swap to a complete new installation, with the fixture removed and hauled away when we're replacing it.
Matches what you're seeing? Call (480) 741-9332 for a real price.
Every new toilet installation includes removing and hauling away the old unit, a fresh wax ring, and a full leak check at the base and supply line before we consider the job done. All units we install meet the 1.28 gallon-per-flush standard required under Queen Creek's adopted plumbing code.
A standard toilet bowl sits around 15 inches from floor to rim, while a comfort-height, sometimes called "chair height," model runs closer to 17 to 19 inches, matching the height of a typical dining chair. Comfort-height units are the more common choice now in new installations generally, since most people find them easier to sit down on and stand up from, and they're often the default option at most price points today. Taller household members in particular tend to prefer them.
For accessibility needs specifically, we can install ADA-compliant toilets, which meet a defined height range along with grab-bar clearance requirements, and we can talk through what that means for your specific bathroom layout before the work starts.
| Situation | Usual Recommendation |
|---|---|
| Running or weak flush, bowl and tank intact | Repair |
| Rocking base, wax ring failed | Repair (reseat with new wax ring) |
| Crack in tank or bowl | Replace |
| Unit is pre-code, high-flow (older than roughly 2015) | Consider replacing for water savings |
Every range below is a real starting point; your exact price is written down and approved before we start.
If the trouble is actually a slow drain rather than the toilet itself, see drain cleaning & unclogging. Want your real number? Call (480) 741-9332.
A few things move the price on any toilet job: whether the shut-off valve under the toilet also needs replacing (common on an older fixture), whether the flooring or subfloor shows any sign of past water damage, and which model you choose. Comfort-height and higher-efficiency units simply cost more than a basic standard bowl. We walk through all of it and give you one written number before starting, not a base price with fees added afterward.
Call now for fast, upfront-priced service anywhere in Queen Creek.
That's almost always a worn fill valve or flapper that isn't sealing properly, letting water trickle from the tank into the bowl. It's a quick, inexpensive fix and worth doing promptly since it wastes real water and money every day it's left alone.
That usually means the wax ring underneath has failed and needs replacing, or the closet bolts have loosened. A loose toilet can let water leak down into the subfloor, so it's worth having checked before it causes more damage.
Yes, the plumbing code Queen Creek enforces requires new toilet installations to use 1.28 gallons per flush or less, which is already standard on nearly all toilets sold today. We only install code-compliant fixtures.
A standard toilet swap is usually under 90 minutes, including removing the old unit and confirming there are no leaks at the base or supply line.
Yes, we carry comfort-height options, and can discuss ADA-compliant installations for accessibility needs.